BOSS-mails WHY NOT PAY (SCAM)?!

BOSS-mails WHY NOT PAY (SCAM)? If you have joined one of the best PTC programs in Indonesia and international PTC and hard / long in getting credit? There are a few tips to consider: 

* The main one is looking for referrals as much as possible so that many who assist you in getting credit * At the time of list / sign-up try in choosing the field of ad / advert that interests you select as much as possible (assuming more and more ads that will appear) * But still pay attention not to choose the field that gives a bad image of the owner of the program by selecting the things that smell cheat * You signed up through the cafe that in fact only have 1 IP, so it is likely your account will be rejected or banned (average PTC program only allows 1 user to register via the same IP). The solution when the first list try using a PC that only has 1 IP that has not been used to register for PTC, and when a new browsing using a shared PC. 

Special bosses who have registered at the newly-mails or intend to register, pay attention to when signing up for when selecting areas of interest are avoided advert (7 p.) to select / tick the following: * Delete me (the account will be banned with an unknown time) * I use cheat software (the account will be banned with an unknown time) * No email (will not be receiving e-mail, so as not to increase the credit by reading e-mail) * Enhancement: to select the sent e-mail, select the site inbox only because if you choose another e-mail inbox you'll be sent an e-mail Join * Blind clicker (the account will be banned with an unknown time) * Keep all my earnings (payout can not, so when they are not out of reach payout limit fee, will impress the boss-mails do not pay you (SCAM) * Me cheaters (the account will be banned with an unknown time) * Need translator (boss-mails require people who understand English, so do not choose this option) So, taking into account the above tips you will be the maximum expected in obtaining credit, and quickly get real money. Do not you just wasting your time and money that ultimately does not produce because of ignorance and of understanding you in the PTC program. 

Note: The minimum payout in the boss-mails are the $ 400,000 it's not real money, but the point. If it reaches 400 000 points can request cashout. Thus, our revenue is actually 70% of the benefits gained from boss-mails and shared with members who request payout. Illustration, if we req payout that month and the boss-mails received from adversiter benefit of $ 1000 then our commission is $ 700 and divided by a distinguished member req payout that month, for example there are 20 members means that we commission is $ 35. Okay ladies and gentlemen?!! Similarly, other PTC that offers $ xxx high credit is the original point and the commission is about 70% - 80% of the benefits of the site. Still think is scam? Or because they do not know the rules of the game, so consider a SCAM? On this site all the recommeded PTC Site, so it should be patient! And not least, the account that we use as a payment processor must fill min $ 2 payout for boss once-mails require a $ 1! 

GOOD LUCK! 

Taken from the blog http://duitiseng.wordpress.com 

How to Use DnsSpeeder

In my posts this time I want to explain how to use, check and also benefit from DnsSpeeder. As in my previous posting about Boost Speed Internet Connection with DnsSpeeder. And this is The steps:

1. After You Enable DNS Speeder then the next step is to add control of the server you are using, It is very important because it will change the server address you use. Choose according to your service you use. Eg Telkom, and where we are currently residing in the city of Surakarta. Find a place DNS servers closest to our position. For info only control the position of telecom servers that are near the city of Surabaya and Semarang Surakarta is. We select only the dns from Semarang city because its position is closer than the city of Surabaya. For other cities please your own search. 
2. After you define a DNS server the next step is to check, working or not control of the server that we select with your mouse goto the bottom right corner of the desktop search that pictorial bird's head and then click the right button of your mouse and select details. So it will be seen data showing that control what we choose to work.
3. Benefits of control very large compared to if we do not use DNS, one of which is to make your Internet connection more stable, does not break the connection, and keep your upload and download speed. Like I did during this, I use Flexi CDMA card and my online 24 hours during one week. My internet connection is lost and I've never downloaded 500 Mb only takes one hour. Whereas before I use this control just download the 300 Mb take up to 12 hours. Tremendous change.

Hopefully useful to you. And good luck.

Tweaking linux (ubuntu)

We all know that Microsoft Windows can be in Tweaking to improve their performance. And what about Ubuntu? whether we can perform optimization of the Ubuntu system to improve its performance such as things we improve the performance of Microsoft Windows? proud (sorry if slightly impressed euphoria), I say, Yes, we can do the same thing with Ubuntu that we have. Turn off / Disable Feature IPV Currently almost all servers have been using IPv4, so the use of IPv6 has been less effective (if not in the said conflict). Most felt effects from the use of IPv6 is the slow performance during our web surfing browser. to turn off IPv6 feature, open a terminal or konsole and type: sudo gedit / etc / modprobe.d / bad_list. type / input the following command: alias net-pf-10 off then save & exit, please reboot your Ubuntu to see the change it effects
Turn off / Disable swapping If your computer / laptop we have the memory 1 Gb or more, we can turn off the feature, called ubuntu swappinguntuk raise overall performance. This swapping values in the range 0 to 100. on the value of 100, the kernel will look for programs that are not active and going to his swapp out from the cache. How to disable this swapping is a way: open a terminal and type: gedit sudo / etc / sysctl.confscroll to the bottom of the file and enter the following line: vm.swappiness = 0 end by pressing the save & exit and reboot your computer to see the effects of the changes.
Enable / Enable Dual Core Processors By default Ubuntu does not enable Dual Core Processors, so the ability or performance of the computer becomes less maximal. In order for Ubuntu to enable the facility or feature Dual Core Processors, we must activate it manually. Do I open a terminal / konsole and type: sudo gedit / etc / init.d / rc. search papers concurrency = none. and when you've met, replace the value none to concurrency = shell, then click save & exit and reboot the computer to see the changes
Ubuntu Speeed Up Menus Do you feel a little slow computer response when we access the menu in Ubuntu? if yes, we can accelerate the loading menu by clicking Places -> Home Folder. Here we need to create a single file called. Gtkrc-2.0. way, right click on the free areas in the Home Folder and select Create Document -> Empty File and name / Rename with. gtkrc-2.0.Ingat, do not forget to give a period (.) in front of a gtkrc-2.0 which means that file later will be hidden. After that, click 2x on the file. Gtkrc-2.0 and enter the following command line: gtk-menu-popup-delay = 0 Finish by pressing the Save & Exit. You must Logout and login again to see the effect the changes. When was the value 0 too fast, we can replace it with a higher value such as 100. in the case of the writer tried, the authors get to set the ideal speed. gtkrc, 2.0 with a value of 100. And when it turns out you do not want this function because maybe, your computer may become unstable or shutdown button in the upper right corner of your computer to be trouble, you can freely delete the files. Gtkrc-2.0 to go back to the beginning of the previous setting. Beside above manual ways we can Accelerating Performance Tweaking Ubuntu or Ubuntu by using the software or application, search on google it must be a lot.

Hacking Satellite Bandwidth / downstream bandwidth stealing Guide

This is for educational purposes only. Use of corporate users.
It is intended to show that you can get free internet and satellite downstream you will use it as an internet connection, ie: browsing, chatting, etc, not just for grabbing files.
Conditions that must be adhered to:
- Linux with DVB cards and LinuxTV drivers, if you do not know how to set this up, go to http://linuxtv.org/
- Linuxtv-DVB-apps-1.1.1.tar.gz (get it on http://linuxtv.org/)
- Tcpdump
- Wget
- An upstream associated with anti-spoofing disabled (read ip spoofing), if you do not know about this, you can still try and see if it will work if combined with satellite Internet downstream
- Point the satellite dish to the downstream with internet connection (I can not say the satellite as mine which I believe is very sensitive information)
By locking Transponder
You need to know the frequency, polarization, and symbol rate transponders.
(Maybe by a friend asked to subscribe to the downstream provider for this information ... ...)
First, save the information to the file:
# Echo inet: [frequency]: [polarization - 'v' or 'h']: 0: [symbol_rate]: 0:0:0:0> chan
DVB lock with 'szap' from linuxtv-DVB-application package:
# Szap-chan n-c 1-l 5150
5150 is for C-Band, change it if you use the other band, read szap used.
Choosing Internet PID
Currently I assume you have set the necessary requirements and can run the command 'dvbtraffic' success at the box.
# Dvbtraffic
This will display a list of PIDs and their current bandwidth.
PID choose from the list, you want to choose one with a highly fluctuating bandwidth, because it's more like a satellite internet PID stream, not the audio / video PID.
Interface configuration
Running this command, enter the PID as a hex (tambahkan'0 x 'in front of the PID)
# Dvbnet-p [PID]
You have managed to get a status report.
Note the newly created interface name, it would say something like "dvb0_1 '.
And enter the following command on one line because you have to delete the routing for the interface as fast as you can, because I believe something bad will happen if you do not
# Ifconfig [interface_name] 64.0.0.0 / 2 promisc; ip route del 64.0.0.0 / 2 dev [interface name]
We have to only receive to each IP in this world.
Obtain an IP Address
It's time to see whether the data that flows to the interface which was internet satellite downstream, if so then you will see the IP address of scrolling on the screen when you enter this command:
# Tcpdump-q-n-i [interface_name]
Do not see your IP address? Try another PID. Before you make other interfaces, delete the current:
# Dvbnet-d [interface_number]
Obtain the interface number of the name (eg for dvb0_21, is number 21)
So you see that your IP address running tcpdump interface, large.
Select IP from the right side of the line. You did not want to use the network and broadcast adresses. The downstream satellite internet provider that was tested on used / 29 network (255 255 255 248), so in my case to calculate network and broadcast address:
I assume the IP address 123.4.5.67 from the right side of the line.
/ 29 network has eight address, date of one to one network, then for the next six hosts, and the last one broadcast.
So I divide 67 by 8.
67 / 8 = 8.375
I took part, 375 and multiply by 8
0.375 x 8 = 3
That means, 67 is 4. Address of the eight possible addresses, which means 3. Host, it is safe to use. You do not want to use the 1st and 8th. Because the network address and broadcast address.
Calculated starting from zero, then 0 is the first address (network address), and 7 are the eight address (broadcast address).
subnet mask = 255 255 255 248 or / 29
123.4.5.64 = network
123.4.5.65 host = 1.
123.4.5.66 host = 2.
123.4.5.67 host = 3.
123.4.5.68 host = 4.
123.4.5.69 host = 5.
123.4.5.70 host = 6.
123.4.5.71 = Broadcast
SNAT
To use internet satellite downstream we must use our IP address is before us as the source.
You assume the upstream provider is connected to the interface eth1.
Enter the command below to use the Internet IP satellite downstream.
# Iptables-t nat-I POSTROUTING 1-o eth1-j SNAT - to 123.4.5.67
This is the part where you have not activated the upstream provider of anti-spoofing, if so then you can not use source IP addresses other than those who give you.
Connection test
Just run the following command and see if it works:
# Wget http://www.yahoo.com
Not successfully download the document from the website above? If so continue to test the graphics on the browser and see if it successfully download the document. If not then just use another IP, or PID.
Remember, it's only for educational purposes, to open the disability that would netadmin do something about this.
Do not use the downstream and IP, a person who pays for it.
Article by yogyafree.net

How to Fix SVCHOST.EXE Application Error 0x745f2780

The instruction at "Ox745f2780" referenced memory at "0x00000000".
The memory could not be "read"

I came across this error the other day at a customer's house. They have Windows XP Professional with a password set for the main administrator account.

When they turned their computer on and it came up to the user login screen. They were presented with this SVCHOST.EXE error message. The only options the error message allows are to click OK to terminate the program or click Cancel to debug the program. After asking them several questions about what they did before turning the computer off, it became apparent that Windows Update had run before the computer was shut down.

Interestingly enough, even starting the computer in Safe Mode produced the same error. While the event log in Windows XP indicates the faulting application is truly svchost.exe.
How to Repair this SVCHOST.EXE error
After some investigating into the 0X745f2780 SVCHOST error, it became apparent the problem is a corrupted Windows Update in Windows XP. Follow the steps below to fix this error.

Verify Windows Update Service Settings
• Click on Start, Run and type the following command in the open box and click OK

services.msc
• Find the Automatic Updates service and double-click on it.
• Click on the Log On Tab and make sure the "Local System Account" is selected as the logon account and the box for "allow service to interact with desktop" is UNCHECKED.
• Under the Hardware Profile section in the Log On Tab, make sure the service is enabled.
• On the General Tab, the Startup Type should be Automatic, if not, drop the box down and select Automatic.
• Under "Service Status" on the General tab, the service should be Started, click the Start button enable it.
• Repeat the steps above for the service "Background Intelligent Transfer Service (BITS)"
Re-Register Windows Update DLLs
• Click on Start, Run, and type CMD and click ok
• In the black command window type the following command and press Enter

REGSVR32 WUAPI.DLL
• Wait until you receive the "DllRegisterServer in WUAPI.DLL succeeded" message and click OK
• Repeat the last two steps above for each of the following commands:

REGSVR32 WUAUENG.DLL
REGSVR32 WUAUENG1.DLL
REGSVR32 ATL.DLL
REGSVR32 WUCLTUI.DLL
REGSVR32 WUPS.DLL
REGSVR32 WUPS2.DLL
REGSVR32 WUWEB.DLL
Remove Corrupted Windows Update Files
• At the command prompt, type the following command and press Enter

net stop WuAuServ
• Still at the command prompt,

type cd %windir% and press Enter
• In the opened folder, type the following command and press Enter to rename the SoftwareDistribution Folder

ren SoftwareDistribution SD_OLD
• Restart the Windows Update Service by typing the following at the command prompt

net start WuAuServ
• type Exit and Press Enter to close the command prompt
Reboot Windows
• click on Start, Shut Down, and Restart to reboot Windows XP
Although this method may not solve all of the issues with a SVCHOST.EXE Application error, I have found it fixed the problem with the 0x745f2780 reference error.

Other Issues with SVCHOST.EXE

I've encountered other issues with SVCHOST taking up 100% of the CPU Cycles. These issues are usually experienced with Windows Update in some form or another. To fix this frustrating problem, following these steps:

1) Download and install Update for Windows XP (KB927891)
2) Download and install an update for Windows Update Agent WSUS 3.0
3) Restart your computer and your computer should run better with slowing to a crawl because of SVCHOST.EXE

[Tip] Overcoming: GENERIC HOST Error for Win32 (svchost.exe)

A few days ago I often get "Generic Host For Win32 error" and then the internet connection is lost and can not reconnect again, the only road must restart the computer.
But the lapse of a few hours it happened like that happen again, I think the system crashes. Then I do the repair by using norton utilities (win doctorates) and scanned with norton corporate antivirus and anti spyware xoftspy. Apparently there is no effect at once and still is often out of his svchost.exe error. Even my computer re-install it still happened again.
Finally after searching on google to see a solution and until now guns' never came out again the error message Generic Host For Win32
The way the manual as follows:
Open the registry editor, start - run - type regedit - Press enter
go to HKEY_LOCAL_MACHINE \ System \ CurrentControlSet \ Servic ice! NetBT! Parameters, then the right-hand column and click search TransportBindName twice.
After that empty the parameters in the Value data and click OK
Last entry to the HKEY_LOCAL_MACHINE \ Software \ Microsoft \ OLE, search EnableDCOM on the right hand column and double click. In the Value data field by default parameters will be filled in Y, change Y to N and then click OK.
Close the registry editor and other applications and then restart konputer.
Above manner if used to the local network will meet several obstacles, because ports 445 and 135 are closed.
A second way in which I have not tried is with his patch windows.
The third way that I had also never tried to use the application, please visit the site and download the file. They claim the application is a solution to fix svchost errors including Generic Host it. If not mistaken, that shareware, until now my full version has not been able to her.
Just search on google, lots of applications ......
The key word software Generic Host Process for Win32 Services Error

How to Search for Serial Numbers in Google ...?

This is a little trick that I normally use to find the serial number of a software with google.
if you search for a serial number for nero (for example) open google.com and type nero 94FBR. And see what comes up?
How does it WORK?
Pretty simple. 94FBR is part of Office 2000 Pro cd key that is widely distributed because it bypasses the activation requirements of Office 2K Pro. With the search for a product name and 94fbr, it guarantees two things.
1) The pages are opened is a special page relating to the product you are looking for his series.
2) Because 94FBR is part of the serial number, and only part of the serial number, you guarantee that any page being displayed is a page listing the serial number.
If you are looking for is a crack, you can use the software .. crakgle
I hope this trick helps you find the serial number of the software with ease.
Enjoy:)
Got another opinion? please share here ..

Accelerate Boot WinXP ...!

Follow these steps

   1. Open Notepad.exe, type "del c: \ windows \ prefetch \ ntosboot-*.* / q" (without quotes) & save as "ntosboot.bat" in c: \
   2. From the Start menu, choose "Run ..." & Type "gpedit.msc".
   3. Double click "Windows Settings" under "Computer Configuration" and double click again on "Shutdown" in the right pane.
   4. In the new window, click the "add", "Browse", find your "ntosboot.bat" file & click "Open".
   5. Click "OK" button, "Apply" & "OK" again to exit.
   6. From the Start menu, select "Run ..." & Type "devmgmt.msc".
   7. Double click on "IDE ATA / ATAPI controllers"
   8. Right click on "Primary IDE Channel" and select "Properties".
   9. Select "Advanced Settings" tab and then on the device or one that does not have 'device type' clicked out select 'none' instead of 'autodetect' & click "OK".
  10. Right click on "Secondary IDE channel", select "Properties" and repeat step 9.
  11. Reboot your computer.
Good luck ...

How to get free software

Today I want to share something that maybe things are not important, but very useful for those who need it. Namely how to obtain software applications (windows) for free ..
Please use much as you guys, but I am not responsible for the results generated by this paper. Because my goal is only to share, not looking for money .. hehe ..
Here are the steps:
1. Select any software you want for free. Find the software on any website which provide them.
2. Download version of "30day trial version" or "demo version" (90% have a trial version at their website).
3. Install the software on your computer, run, and click the Help menu.
4. Small window will appear and give information on the software version number. For example: "version 1.2.3".
5. Remember the software and version number, or if you doubt, record it in notepad or something.
6. Browsing to http://astalavista.box.sk/ software and perform a search in accordance with the name and version number in their search facility. Web follows a similar service AstaLaVista.
- Cracks.thebugs.ws
- Crak.com
- Crackserialkeygen.com
or if you do not find what you are looking for, go to google, continue to type "crack / serial / keygen (software & version)"
7. You'll get a list of search results, locate and select the software until you find the crack you want. Then download the file.
8. Been able cracknya? Apply to stay in your target's software.
9. There are several types of crack:
Crack type where you only need to "click" twice icon.exe and automatically it will crack the trial software you'd automatically.
Type of crack that gives you the data usermane and serial number.
Type of crack that needs to copy all the downloaded files in a folder and paste into the trial version.
10. The crack usually has instructions about how to use it, but if not there you can try three methods mentioned above.
11. After the software is becoming full, you can relax without fear of trial period finished.
12. But if you want a direct download of full version software, you can find software that is bundled with cracknya. You can look at http://d60pc.com, http://4shared.com or http://indowebster.com
13. Be careful with downloaded a virus that may be involved, make sure you download the source from the horse's trust.

Increase my Internet connection speed with DnsSpeeder

Here is information about the tricks internet connection, namely how to Increase speed Internet connection with free software or freeware. Freeware Which I Will inform here is control Speeder. Use of this self-control Speeder it is very easy, Because We do not need to do anything, Simply by running the control software Speeder only. Workings of this control Speeder Itself That is as DNS Proxy will of read the ip address of the domain We Are Open on the browser and adjust with the existing in the cache computer. If the computer does not exist in the cache, then the ip address of the domain name will of be sent to Some of the existing DNS server, the results are then sent back to our computer (client). We opened a web page Becomes faster process.

From some of the existing DNS servers, we can add another DNS by tapping the icon insert, then we enter the control that we want, for example, control from OpenDNS (208.67.222.222 and 208.67.220.220).

To run direct DnsSpeeder when entering Windows, it is sufficient to ensure check mark Start at login, and to hide the panel we just need to tick mark DnsSpeeder Hide this dialogue starts Pls.To Using IP Server is enough to shift the IP to the very top.
Similarly brief information about this DnsSpeeder, hopefully useful.

DnsSpeeder can be downloaded at Software Download, Freeware, and Software Database.